[cisco-voip] Inbound Caller ID NAME

[Justin Steinberg]

H.323 NAME Display feature in 12.4(11) XW

http://www.cisco.com/en/US/products/ps6706/prod_release_note09186a0080837f1a.html#wp329995


On 9/20/07, CarlosOrtiz at bayviewfinancial.com <
CarlosOrtiz at bayviewfinancial.com> wrote:
>
>
> Can anyone verify Robert's suggested IOS version for inbound Caller ID to
> work on H.323?  What additional commands on the gateway and Call Mgr
> config are needed?
>
> Carlos
>
>
>
>  *Robert Kulagowski <rkulagow at gmail.com>*
>
> 09/14/2007 11:30 AM
>   To
> CarlosOrtiz at bayviewfinancial.com  cc
> cisco-voip at puck.nether.net  Subject
> Re: [cisco-voip] Inbound Caller ID NAME
>
>
>
>
>
>
> > I was looking through the archives and it seems that to get inbound
> > caller ID NAME to work you MUST:
> >
> > 1) Use MGCP
> > 2) Enable NI2 protocol
> >
> > Is this still the case?  Did I miss anything else?
>
> Check the archives a little more! :)
>
> We just discussed this not too long ago.
>
> You can use H.323: either use the cname tcl script that was written by
> David Zilk or the IOS that has this built-in.  12.4.11XU?
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070927/dc736733/attachment.html