[cisco-voip] Sending calling ID outbound with PRI + CCME 4.0
Anthony H
ez4me2c3d at gmail.com
Fri Sep 14 15:35:46 EDT 2007
In all of my experience, it does this automatically.
I have to control it with translations, so you don't receive a call on
your phone from the unity pilot number of say 6000. Or when a user
calls outbound, it's not 2101, but some real DID the company owns.
If you do a debug isdn q931 and place the call, you will see exactly
what CME is send out the PRI.
On 9/14/07, Paul Choi <asobihoudai at yahoo.com> wrote:
> How would I configure a CCME 4.0 box to send
> ephone-DNs out the PRI?
>
> Paul
>
>
>
> ____________________________________________________________________________________
> Yahoo! oneSearch: Finally, mobile search
> that gives answers, not web links.
> http://mobile.yahoo.com/mobileweb/onesearch?refer=1ONXIC
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
--
Anthony
More information about the cisco-voip
mailing list