[cisco-voip] VG224 and fax passthrough

[Scott Voll]

It's IP..... so yes. turn off ECM and set Faxes to 14.4 (G3)  Super G3 is
33.6 and does not work on IP at this time.  If something has changed let me
know but I have not heard of any new Fax additions weather in ATA / VG / or
FXS that support 33.6.

Scott


On 9/18/07, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
>
>  We're working on VG224 and faxes and modems with passthrough.
>
> Do I still need to turn off ECM and SuperG3 transmission capabilities? I
> believe my FAX manual only had tx and rx speeds, no mention of G3, if so,
> what speed have people used to ensure fax transmittal?
>
> Thanks, Lelio
>
>
> --------------------------------------------------------------------------------
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo."
> WJR
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070918/8a4f09f2/attachment.html