[cisco-voip] RP not registering

[Scott Voll]

I assume this means there can only be one 911 Route point

*

Note *Cisco ER can still support only one emergency number; once you change
it,

Cisco ER will start routing calls received at the new emergency number route

point.
Scott


On 9/19/07, Scott Voll <svoll.voip at gmail.com> wrote:
>
> I rebooted the CER server and the unregistered one came up but the other
> one went down. I disassociated it and the other one came up.  Can there only
> be one 911 Route point associated to CER?
>
> Thanks
>
> Scott
>
>
>  On 9/19/07, Wes Sisk <wsisk at cisco.com> wrote:
> >
> > 1. are the RP's associated to a user?
> > 2. is that user a member of all groups that contain *CTI* (there are
> > several) except SuperProvider.  Do not make it a member of superprovider.
> > 3. on the DN page for the RP make sure 'cti use enabled' is checked.
> >
> > After that, can you login to CCMUser with application username and
> > password? (confirm account is working and password correct)
> >
> > Next step after that would be to get CTI SDI and SDL traces.  Follow the
> > ProviderOpenRequest and go forward from there.
> >
> > /Wes
> >
> > Scott Voll wrote:
> >
> >  I have two route points that are registered with CM (5.1.2) via a
> > application user (to CER).  I have now created a third Route Point but it
> > will not register.  What's up?  how do I trouble shoot this one.
> >
> > TIA
> >
> > Scott
> >
> > ------------------------------
> >
> > _______________________________________________
> > cisco-voip mailing listcisco-voip at puck.nether.nethttps://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070919/f2156879/attachment.html