[cisco-voip] blocking a number to an analog phone

[Paul Choi]

I'd make the same recommendation. If you have the
caller ID string coming in on your PRI, you can make a
blocking translation rule on its corresponding voice
port.

Paul

--- Kathy Dupree <KDupree at randolphcollege.edu> wrote:

> Annoying calls again.  Is there a way to block a
> certain number to an
> analog phone on a vg248?  Call Manager 4.1.  Thanks,
> Kathy
> 
>  
> 
> Katherine O. Dupree
> 
> Randolph College
> 
> Main 243
> 
> Telecommunications Support/Infrastructure
> Coordinator
> 
> kdupree at randolphcollege.edu
> <mailto:kdupree at rmwc.edu> 
> 
> (434) 947 8371
> 
>  
> 
> > _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip



       
____________________________________________________________________________________
Looking for a deal? Find great prices on flights and hotels with Yahoo! FareChase.
http://farechase.yahoo.com/