[cisco-voip] BAT route patterns?

[Carter, Bill]

Anybody suggest how to use AXL/SOAP.  I would like to, but I am not a
programmer.

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Monday, September 24, 2007 5:02 PM
To: Scott Voll; cisco voip list
Subject: Re: [cisco-voip] BAT route patterns?


nope. people have suggested using AXL/SOAP.

	----- Original Message ----- 
	From: Scott Voll <mailto:svoll.voip at gmail.com>  
	To: cisco voip list <mailto:cisco-voip at puck.nether.net>  
	Sent: Monday, September 24, 2007 5:09 PM
	Subject: [cisco-voip] BAT route patterns?

	is there a way to BAT route patterns?  I'm setting up some toll
bypass and would like to add a couple hundred patterns rather then one
by one.  CM 4.1.3es100
	 
	TIA
	 
	Scott

	
________________________________


	

	_______________________________________________
	cisco-voip mailing list
	cisco-voip at puck.nether.net
	https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070925/a2d1fd53/attachment.html