[cisco-voip] Inbound Caller ID NAME

[CarlosOrtiz at bayviewfinancial.com]

I will hopefully be testing this out in the coming weeks.  If anyone else 
does please post your results.  I'll send mine when I test it out. 



"Jason Aarons \(US\)" <jason.aarons at us.didata.com> 
09/27/2007 10:53 AM

To
"Linsemier, Matthew" <MLinsemier at apcapital.com>, "Justin Steinberg" 
<jsteinberg at gmail.com>, <CarlosOrtiz at bayviewfinancial.com>
cc
<cisco-voip at puck.nether.net>
Subject
RE: [cisco-voip] Inbound Caller ID NAME






This may indicate a fix in IOS for H323, but will CallManager 4.1 show the 
incoming Calling Party Name on a 79XX just like MGCP ?  I’ve seen things 
fixed in IOS, only to have CallManager still not work.
 
From: cisco-voip-bounces at puck.nether.net 
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Linsemier, 
Matthew
Sent: Thursday, September 27, 2007 10:46 AM
To: Justin Steinberg; CarlosOrtiz at bayviewfinancial.com
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Inbound Caller ID NAME
 
Does anyone know when features like this transfer out of a specialized XW 
release and are added to the general or T train of code?
 
From: cisco-voip-bounces at puck.nether.net 
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Justin Steinberg
Sent: Thursday, September 27, 2007 9:03 AM
To: CarlosOrtiz at bayviewfinancial.com
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Inbound Caller ID NAME
 
H.323 NAME Display feature in 12.4(11) XW
http://www.cisco.com/en/US/products/ps6706/prod_release_note09186a0080837f1a.html#wp329995
 
On 9/20/07, CarlosOrtiz at bayviewfinancial.com < 
CarlosOrtiz at bayviewfinancial.com> wrote:

Can anyone verify Robert's suggested IOS version for inbound Caller ID to 
work on H.323?  What additional commands on the gateway and Call Mgr 
config are needed? 

Carlos 


Robert Kulagowski <rkulagow at gmail.com> 
09/14/2007 11:30 AM 


To
CarlosOrtiz at bayviewfinancial.com 
cc
cisco-voip at puck.nether.net 
Subject
Re: [cisco-voip] Inbound Caller ID NAME
 








> I was looking through the archives and it seems that to get inbound 
> caller ID NAME to work you MUST:
> 
> 1) Use MGCP
> 2) Enable NI2 protocol
> 
> Is this still the case?  Did I miss anything else?

Check the archives a little more! :)

We just discussed this not too long ago.

You can use H.323: either use the cname tcl script that was written by 
David Zilk or the IOS that has this built-in.  12.4.11XU?

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip
 

CONFIDENTIALITY STATEMENT
This communication and any attachments are CONFIDENTIAL and may be 
protected by one or more legal privileges. It is intended solely for the 
use of the addressee identified above. If you are not the intended 
recipient, any use, disclosure, copying or distribution of this 
communication is UNAUTHORIZED. Neither this information block, the typed 
name of the sender, nor anything else in this message is intended to 
constitute an electronic signature unless a specific statement to the 
contrary is included in this message. If you have received this 
communication in error, please immediately contact me and delete this 
communication from your computer. Thank you. 


Disclaimer: This e-mail communication and any attachments may contain 
confidential and privileged information and is for use by the designated 
addressee(s) named above only. If you are not the intended addressee, you 
are hereby notified that you have received this communication in error and 
that any use or reproduction of this email or its contents is strictly 
prohibited and may be unlawful. If you have received this communication in 
error, please notify us immediately by replying to this message and 
deleting it from your computer. Thank you. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070927/acfffd84/attachment-0001.html