[cisco-voip] silly qs: change pri time slot

[Patrick Diener]

and since you delete your voice-port and add it again it will be gone
from all your dial-peers pointing to it.

Regards
Patrick

On Thu, Apr 3, 2008 at 4:24 PM, Ryan Ratliff <rratliff at cisco.com> wrote:
> In summary to change the timeslots for the PRI you have to remove the
>  existing PRI config.
>  1. shut down the voice-port for the PRI
>  2. shut down the serial interface for the PRI (maybe not necessary
>  but I do it)
>  3. 'no pri-group timeslots...' on the controller you want to change
>  4. reconfigure pri-group
>  5. 'no shut' the serial interface for the PRI
>  6. 'no shut' the voice-port for the PRI
>
>  This should take care of it for you.  Shutting the controller itself
>  is an option, but like the serial interface may not be necessary.
>
>  -Ryan
>
>
>
>  On Apr 3, 2008, at 9:26 AM, Jonathan Charles wrote:
>  Also no out the existing controller pri-group timeslots command
>
>
>
>  Jonathan
>
>  On Thu, Apr 3, 2008 at 7:30 AM, Daniel Rodriguez
>  <drodriguez at fidelus.com> wrote:
>  >
>  >
>  >
>  >
>  > Shutdown the voice-port for your PRI.
>  >
>  >
>  >
>  > conf t
>  >
>  > voice-port 0/1/0:15
>  >
>  > shut
>  >
>  >
>  >
>  >
>  >
>  > From: cisco-voip-bounces at puck.nether.net
>  > [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Syed
>  > Khalid Ali
>  >  Sent: Thursday, April 03, 2008 3:53 AM
>  >
>  >  To: cisco-voip at puck.nether.net
>  >  Subject: [cisco-voip] silly qs: change pri time slot
>  >
>  >
>  >
>  >
>  >
>  >
>  > hi
>  >
>  >
>  >
>  >
>  >
>  > previously we had a 32 channel dsp card. we had one pri and a four
>  > port fxo
>  > card. when i configured the pri group time slots it told me that
>  > maximum can
>  > be 28 as enough dsp resources not available.
>  >
>  >
>  >
>  >
>  >
>  > recently we installed another pri and another dsp but i tried to
>  > change the
>  > time slot to 31 on first pri it told me to shutdown the voice
>  > interface
>  > card.
>  >
>  >
>  >
>  >
>  >
>  > I tried shutting down the controller as well as the logical serial
>  > interface
>  > but in vain. below is the configration script:
>  >
>  >
>  >
>  >
>  >
>  > network-clock-participate wic 1
>  >  !
>  >
>  >
>  > controller E1 0/1/0
>  >   shutdown
>  >   framing NO-CRC4
>  >   pri-group timeslots 1-28  <-- need to change to 31
>  >  !
>  >  controller E1 0/1/1
>  >   framing NO-CRC4
>  >   pri-group timeslots 1-31
>  >  !
>  >
>  >
>  > interface Serial0/1/0:15
>  >   no ip address
>  >   isdn switch-type primary-net5
>  >   isdn incoming-voice voice
>  >   no cdp enable
>  >
>  >
>  > !
>  >  interface Serial0/1/1:15
>  >   no ip address
>  >   isdn switch-type primary-net5
>  >   isdn incoming-voice voice
>  >   no cdp enable
>  >
>  >
>  >
>  >
>  >
>  >
>  >
>  >
>  > Regards,
>  >
>  >
>  >
>  >
>  >
>  > Syed Khalid Ali
>  >
>  >
>  >
>  > _______________________________________________
>  >  cisco-voip mailing list
>  >  cisco-voip at puck.nether.net
>  >  https://puck.nether.net/mailman/listinfo/cisco-voip
>  >
>  >
>  _______________________________________________
>  cisco-voip mailing list
>  cisco-voip at puck.nether.net
>  https://puck.nether.net/mailman/listinfo/cisco-voip
>
>  _______________________________________________
>  cisco-voip mailing list
>  cisco-voip at puck.nether.net
>  https://puck.nether.net/mailman/listinfo/cisco-voip
>