[cisco-voip] Digital Networking Unity 4.2 and 5.0... problem...

[Pat Hayes]

Works fine for me, and the networking requirements doc doesn't mention 
any required ESs. Did you remember to increase the search scope on the 
primary location page of the 5.0 server? Sounds like it is still set to 
local server.

-------- Original Message  --------
From: "Jonathan Charles" <jonvoip at gmail.com>
To: "cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net>
Subject: [cisco-voip] Digital Networking Unity 4.2 and 5.0... problem...
Date: 4/6/2008 7:57 PM

> OK, So, I set up digital networking between two Unity servers, one is
> Unity 4.2(1) and the other is Unity 5.0.
> 
> They are VM Only and connecting to different CCM clusters.
> 
> When you hit 2 to send a message, you can only send from the 4.2
> server to 5.0, but not the other way (5.0 to 4.2).
> 
> I am sure there is an ES out there for this...
> 
> Anyone know which one?
> 
> 
> 
> 
> 
> Jonathan
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip