[cisco-voip] Digital Networking Unity 4.2 and 5.0... problem...

[Jonathan Charles]

It turned out to be a rogue SMTP address in Exchange.. all is fixed...


Jonathan

On Mon, Apr 7, 2008 at 8:53 AM, Pat Hayes <pat-cv at wcyv.com> wrote:
> Works fine for me, and the networking requirements doc doesn't mention any
> required ESs. Did you remember to increase the search scope on the primary
> location page of the 5.0 server? Sounds like it is still set to local
> server.
>
>
>
>  -------- Original Message  --------
>  From: "Jonathan Charles" <jonvoip at gmail.com>
>  To: "cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net>
>  Subject: [cisco-voip] Digital Networking Unity 4.2 and 5.0... problem...
>  Date: 4/6/2008 7:57 PM
>
>
> >
> >
> >
> > OK, So, I set up digital networking between two Unity servers, one is
> > Unity 4.2(1) and the other is Unity 5.0.
> >
> > They are VM Only and connecting to different CCM clusters.
> >
> > When you hit 2 to send a message, you can only send from the 4.2
> > server to 5.0, but not the other way (5.0 to 4.2).
> >
> > I am sure there is an ES out there for this...
> >
> > Anyone know which one?
> >
> >
> >
> >
> >
> > Jonathan
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>