[cisco-voip] back to back isdn bri/pri connectivity

[Kelemen Zoltan]

BRI to BRI and PRI to PRI, yes. Use isdn protocol emulate network/client 
etc. settings on the Serial/Bri interface config.

For PRI-to-PRI you might need a Cross E1/T1 cable pairs 1,2-4,5 
inverted, for BRI I'm not sure.

BRI to PRI as far as I know does not work. At the very least not back to 
back.

regards,
  Zoltan

Syed Khalid Ali wrote:
> Hi
>  
> I have a couple a 2600 with BRI and PRI cards. Is there any way that I 
> can connect them back to back in my lab.
>  
> regards,
>  
> khalid
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>