[cisco-voip] CFA to predefined number

[Lelio Fulgenzi]

The only alternative is to create a new VM profile and pilot for the user 
and have them press two buttons, fwd and messages.

Chances are they don't forward to VM as often as they want to forward to 
this other destination.

Not scalable though.

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Bad grammar makes me [sic]" - Tshirt

----- Original Message ----- 
From: "Robert Schuknecht" <rschuknecht at gmx.de>
To: "Cisco-VoIP PuckNetherNet" <cisco-voip at puck.nether.net>; 
<lelio at uoguelph.ca>; "Robert Schuknecht" <rschuknecht at gmx.de>
Sent: Wednesday, April 16, 2008 7:29 AM
Subject: Antw: Re: [cisco-voip] CFA to predefined number


> Hi Lelio,
>
> i had the same idea but it did not work. after i pressed the CFA Softkey i 
> heard the dialtone, but nothing happend.
>
>
>>>> Lelio Fulgenzi<lelio at uoguelph.ca> schrieb am Mittwoch, 16. April 2008 
>>>> um 12:46
> in Nachricht b2fb97e5877855e52bcf79e9cea16ec7:
>> Try creating a blank translation to the destination - put it in a 
>> partition
>> that is the only partition in a specific CSS then assign this CSS to the
>> forwarding search space.
>>
>> It might work.
>>
>> Basically the same steps as creating a plar.
>>
>> --------------------------------------------------------------------------------
>> Lelio Fulgenzi, B.A.
>> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
>> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>> "Bad grammar makes me [sic]" - Tshirt
>>
>> ----- Original Message ----- 
>> From: "Robert Schuknecht" <rschuknecht at gmx.de>
>> To: "Cisco-VoIP PuckNetherNet" <cisco-voip at puck.nether.net>
>> Sent: Wednesday, April 16, 2008 4:46 AM
>> Subject: [cisco-voip] CFA to predefined number
>>
>>
>>> Hi List,
>>>
>>> is it possible to restrict CallForwardAll to an predefined number, so 
>>> the
>>> user has only to press the CFA Softkey and all calls are forwarded to an
>>> predefined number?
>>>
>>> Any hints and ideas are welcome!
>>>
>>> /Robert
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>
>