[cisco-voip] How to turn on/turn off Single Number Reach from the end user IP Phone

[Thomas Stroehm]

Hi Jordi,
to enable or disable Mobility from the IP Phone it is necessary to have 
a CUCM 7.X. Prior to Version 7 this can only be done via the CCMUser 
Webpage,

Thomas

Jordi Riba (Europe) wrote:
>
> Hi,
>
> I would like to know how to disable/enable single number reach from 
> the end user IP Phone. It seems single number reach is working fine, 
> but I cannot disable it from end user ip phone.
>
> I have added Mobility softkey button in “on hook” state, but when I 
> press it, it only tells me that Mobility is active but I have no way 
> to turn it off.
>
> Any idea? I’m using CCMBE 6.1.2
>
> Thanks!
>
> Jordi!
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>