[cisco-voip] How to turn on/turn off Single Number Reach from the end user IP Phone

[Steve G]

If the user is leaving the office for the day and does not want any calls on
their alternate phone, they could forward their IP phone to voicemail.

On Tue, Dec 2, 2008 at 3:45 AM, Thomas Stroehm <thomas at stroehm.com> wrote:

> Hi Jordi,
> to enable or disable Mobility from the IP Phone it is necessary to have a
> CUCM 7.X. Prior to Version 7 this can only be done via the CCMUser Webpage,
>
> Thomas
>
> Jordi Riba (Europe) wrote:
>
>>
>> Hi,
>>
>> I would like to know how to disable/enable single number reach from the
>> end user IP Phone. It seems single number reach is working fine, but I
>> cannot disable it from end user ip phone.
>>
>> I have added Mobility softkey button in "on hook" state, but when I press
>> it, it only tells me that Mobility is active but I have no way to turn it
>> off.
>>
>> Any idea? I'm using CCMBE 6.1.2
>>
>> Thanks!
>>
>> Jordi!
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081203/77587f6e/attachment.html>