[cisco-voip] 7941G does not register

[Ryan Ratliff]

Have you run the CTL plugin to create a ctl file and set the cluster  
security mode to mixed?

If you don't know what this is, or haven't run it, then this message  
is completely expected and you can ignore it.

-Ryan

On Dec 3, 2008, at 6:37 AM, Ahmad Alkam wrote:

Hi Thomas

Thanks for helpful, i checked its OK and i reset it factory but the  
same problem.
On message status i found:
SEP001FCAE89D11.cnf.xml
No CTL installed
File Not found : CTLFile.tlv

please, advice on it.

Thanks,
Ahmad

From: Thomas Stroehm <thomas at stroehm.com>
To: Ahmad Alkam <alkam.ahmad at yahoo.com>
Cc: cisco-voip at puck.nether.net
Sent: Wednesday, December 3, 2008 12:51:47 PM
Subject: Re: [cisco-voip] 7941G does not register

Hi,
can you check if the IP Address and TFTP Server is OK on the Phone ?
If yes, please do a fact reset and try again !

Thomas

Ahmad Alkam wrote:
 > Dears,
 > I have cisco 7941 ip phone but it don’t register on Call manager.  
The Call manager ver. 4.2 and when the ip phone booting I found in  
status message “CTL file not found or install’
 >
 > Please advanced about it, are the problem from IP Phones or what??
 >
 >
 > Thanks
 >
 > Ahmad
 >
 >
 >  
------------------------------------------------------------------------
 >
 > _______________________________________________
 > cisco-voip mailing list
 > cisco-voip at puck.nether.net
 > https://puck.nether.net/mailman/listinfo/cisco-voip
 >


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081203/93f63d73/attachment.html>