[cisco-voip] Hunt Group tied to Analog ports on VG224

[Micah Bennett]

Hello all

I need to build a hunt group that will attach out to an analog device. 

I think this will work but I wanted to see if anyone has any experience.


Here is the scenario:

We have CCM 4.2(3)
We have a VG224 that gives me 24 analog ports to use.

I will build a Hunt Group Pilot number and assign some of the VG224
ports to this.
Off the VG224 block I will wire the lines via RJ11 connections to the
server device that is going to answer the lines.  

A toll free number will come in and point to the Hunt Group Pilot
number.  The calls will then roll to the group of (8) analog lines where
it will select one and the call will get answered by the server device.
The server does its work and sends the data back over the connection and
disconnects the call.  The line is ready for another call to come in.

Should this work?

Micah Bennett
Telecommunications Admin
Automated License Systems

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081204/716c8488/attachment.html>