[cisco-voip] Hunt Group tied to Analog ports on VG224

[Matthew Saskin]

Works well - have a client doing the same thing for an old analog IVR.
 Only problem is the tendency for vg-224 ports to get hung and require
shut/no shuts or worse, device reloads...


On 12/4/08, Micah Bennett <mbennett at als-xtn.com> wrote:
> Hello all
>
> I need to build a hunt group that will attach out to an analog device.
>
> I think this will work but I wanted to see if anyone has any experience.
>
>
> Here is the scenario:
>
> We have CCM 4.2(3)
> We have a VG224 that gives me 24 analog ports to use.
>
> I will build a Hunt Group Pilot number and assign some of the VG224
> ports to this.
> Off the VG224 block I will wire the lines via RJ11 connections to the
> server device that is going to answer the lines.
>
> A toll free number will come in and point to the Hunt Group Pilot
> number.  The calls will then roll to the group of (8) analog lines where
> it will select one and the call will get answered by the server device.
> The server does its work and sends the data back over the connection and
> disconnects the call.  The line is ready for another call to come in.
>
> Should this work?
>
> Micah Bennett
> Telecommunications Admin
> Automated License Systems
>
>