[cisco-voip] CM 6.12 BLF functionality

[Fuermann, Jason]

That is how call pickup is supposed to work. If you place both DN's in a pickupgroup and enable pickup on the blf then the light will flash when the phone rings

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Carter, Bill
Sent: Thursday, December 04, 2008 1:30 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CM 6.12 BLF functionality

I don't know if this is how BLF is supposed to work or not.

Phone A - DN 6610   Phone B - DN 6000, BLF 6610

Phone C dials 6610

Phone A rings on 6610, Phone B BLF 6610 does not show any indication of an inbound call.

Phone A goes off-hook and answers the call. Phone B BLF 6610 icon/light shows the line in use.

Should the BLF show an indication for an incoming call? How do I get BLF Call Pickup to work ?

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081204/8dca9daf/attachment.html>