[cisco-voip] CM 6.12 BLF functionality

[Thomas Stroehm]

Hi,
further more it is necessary to check the Pickup box in the BLF Screen 
on the CCM Admin Pages...
Than it will work !

Thomas

Fuermann, Jason wrote:
>
> That is how call pickup is supposed to work. If you place both DN’s in 
> a pickupgroup and enable pickup on the blf then the light will flash 
> when the phone rings
>
> *From:* cisco-voip-bounces at puck.nether.net 
> [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf Of *Carter, Bill
> *Sent:* Thursday, December 04, 2008 1:30 PM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] CM 6.12 BLF functionality
>
> I don’t know if this is how BLF is supposed to work or not.
>
> Phone A – DN 6610 Phone B – DN 6000, BLF 6610
>
> Phone C dials 6610
>
> Phone A rings on 6610, Phone B BLF 6610 does not show any indication 
> of an inbound call.
>
> Phone A goes off-hook and answers the call. Phone B BLF 6610 
> icon/light shows the line in use.
>
> Should the BLF show an indication for an incoming call? How do I get 
> BLF Call Pickup to work ?
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>