[cisco-voip] Dial Peer Help

[Justin Steinberg]

you should remove the 'direct-inward-dial' command from your 618 POTS
dialpeer.  you're running T1 CAS, it doesnt like that cmd.

On Sat, Dec 6, 2008 at 2:02 AM, cisco.voip <cisco.voip at verizon.net> wrote:

> I have Phone - PBX -- Cisco2811 H323 GW --- Cisco CCM v4.2 --- IP Phone1
>
> THe PBX places the call to 6175212001, I match the inbound pots dialpeer
> (from debug)
> but the call never matches the outgoing voip dialpeer to go to the CCM and
> ring the phone on the call manager?
>
> dial-peer voice 617 voip (Need call to go to CCM)
> destination-pattern 6175212...
> session target ipv4:10.1.200.21
> no vad
> !
> dial-peer voice 618 pots (Call in from PBX)
> incoming called-number 6175212...$
> direct-inward-dial
> port 2/0:0
> forward-digits all
>
> Dec  5 23:56:47: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
>  Calling Number=, Called Number=, Voice-Interface=0x65497FB0,
>  Timeout=TRUE, Peer Encap Type=ENCAP_VOICE, Peer Search
> Type=PEER_TYPE_VOICE,
>  Peer Info Type=DIALPEER_INFO_SPEECH
> Dec  5 23:56:47: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
>  Match Rule=DP_MATCH_PORT;
> Dec  5 23:56:47: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
>  Result=Success(0) after DP_MATCH_PORT; Incoming Dial-peer=618
> Dec  5 23:56:47: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerSPI:exit at 5938
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081207/c9d0651f/attachment-0001.html>