[cisco-voip] Transcoding to CRS 3.52

[Carlos Ortiz]

I am having an issue getting calls from a G.729 region (remote site) to
work with a CRS 3.52 server that is running G.711.  I know a transcoder
is needed to make this work but it seems that the transcoder in not
being invoked even though it's in the MRG and MRL of the CTI ports and
is showing registered in CM.  

 

Setup is as follows:

 

Site A - remote site (region A)

Site B - central site (Region B)

IOS Enhanced transcoder (Region C)

 

Region A < -- >B  -  G.729

Region A < --> region C - G.729

Region  C < -- > B  - G.711

 

 

Am I missing something?

 

 

Carlos Ortiz

IP Communications Supervisor

Information Technology

SSC Incorporated

(305) 779-6070 Ext. 7122

cortiz at sscincorporated.com <mailto:cortiz at sscincorporated.com> 

 



CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential or proprietary information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, immediately contact the sender by reply e-mail and destroy all copies of the original message.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081209/37a24f55/attachment.html>