[cisco-voip] Transcoding to CRS 3.52

[Ryan Ratliff]

That looks correct.  You'll need to look at the CCM traces to make  
sure it's trying to invoke the transcoder and to see why it is failing.

-Ryan

On Dec 9, 2008, at 1:32 PM, Carlos Ortiz wrote:

I am having an issue getting calls from a G.729 region (remote site)  
to work with a CRS 3.52 server that is running G.711.  I know a  
transcoder is needed to make this work but it seems that the  
transcoder in not being invoked even though it’s in the MRG and MRL  
of the CTI ports and is showing registered in CM.



Setup is as follows:



Site A – remote site (region A)

Site B – central site (Region B)

IOS Enhanced transcoder (Region C)



Region A < -- >B  -  G.729

Region A < --> region C - G.729

Region  C < -- > B  - G.711





Am I missing something?





Carlos Ortiz

IP Communications Supervisor

Information Technology

SSC Incorporated

(305) 779-6070 Ext. 7122

cortiz at sscincorporated.com




CONFIDENTIALITY NOTICE: This e-mail message, including any  
attachments, is for the sole use of the intended recipient(s) and may  
contain confidential or proprietary information. Any unauthorized  
review, use, disclosure or distribution is prohibited. If you are not  
the intended recipient, immediately contact the sender by reply e- 
mail and destroy all copies of the original message.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081209/d7f88906/attachment.html>