[cisco-voip] Enable Caller ID UNblock

[David Zhars]

Yes, I have some lines where we block caller ID plugged into my 2801 router.
When we tried to call a #, that # would not accept calls from people who
block their Caller ID.
So we tried the *82 suffix, and it did not go through.

I have created a route pattern that looks like this:
8.*82[2-9]XXXXXX
(users in this building press an 8 for an outside line)

My Discard Digits is set to <none>

The calls are still not completed (I get the Cisco "call cannot be completed
as dialed")
Calls should go out the POTS lines on the 2801, so is it that I should be
doing something on the 2801 and not in CCM 4.1(3)

Thanks anyone!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081209/4421a82f/attachment.html>