[cisco-voip] Enable Caller ID UNblock

[David Zhars]

The 2801 is in H.323

On Tue, Dec 9, 2008 at 3:59 PM, Ryan Ratliff <rratliff at cisco.com> wrote:

> Is the 2801 MGCP or H.323?  With discard digits none you are sending
> 8*82.... to the gateway.  If the telco can't route this it will send back
> unknown/unallocated number and CUCM will play that tone via Annunciator.
>
> -Ryan
>
> On Dec 9, 2008, at 4:14 PM, David Zhars wrote:
>
> Yes, I have some lines where we block caller ID plugged into my 2801
> router.
> When we tried to call a #, that # would not accept calls from people who
> block their Caller ID.
> So we tried the *82 suffix, and it did not go through.
>
> I have created a route pattern that looks like this:
> 8.*82[2-9]XXXXXX
> (users in this building press an 8 for an outside line)
>
> My Discard Digits is set to <none>
>
> The calls are still not completed (I get the Cisco "call cannot be
> completed as dialed")
> Calls should go out the POTS lines on the 2801, so is it that I should be
> doing something on the 2801 and not in CCM 4.1(3)
>
> Thanks anyone!
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081209/e5644de4/attachment.html>