[cisco-voip] Need to enter in a pause for LD account codes on PRI Gateway - h.323

[tthomas at trentek.com]

I am running a H.323 VoIP network. We have not had any trouble until the
guys in accounting want to break-up the LD bills.  So we have implemented
account codes on the PRI at the Gateway. This is the service from Sprint
that each caller dials the LD number and then they are presented with a
tone. At this point they must enter in the code and press #.  This is
pretty straight forward, but the people are starting to use the codes from
other sites. So some site disconnected service  and are still getting
bills.  I say get rid of them more trouble that they are worth.  I need to
put the account code in the router so that when calls are made from a
location they are put in the dial string so that the LD code is entered
for their site. No user intervention

I need to come up with a plan to inbed the number in the router using
translation rules.

voice translation-rule 31
 rule 1 /^\(.*\)/ /\1,,,10121#/

R1.9_voice_gateway#test voice translation-rule 31 2146742198
Matched with rule 31
Original number: 12146742198    Translated number: 12146742198,,10121#
Original number type: none      Translated number type: none
Original number plan: none      Translated number plan: none

So this rule is to put the code on every number dial the only down side is
that I can seem to get the code accepted  and the call fails.

We are using a Sprint PRI and this connects directly to the gateway.

Dial-peer is as follows
!
dial-peer voice 9 pots
 destination-pattern 12147642198
 translate-outgoing called 31
 no digit-strip
 port 0/0/0:23
 forward-digits extra inband
!
Syslog output
12-11-2008          10:59:51               Local7.Notice     11.0.6.6     
          349: Dec 11 16:59:51.275: %VOIPAAA-5-VOIP_CALL_HISTORY:
CallLegType 1,
ConnectionId F59A9F72C6DB11DD8069FAFDA149024B,
SetupTime 16:59:51.265 UTC Thu Dec 11 2008,
PeerAddress 12146742198,,,,,,10121#,
PeerSubAddress
DisconnectCause 64
DisconnectText invalid ie contents (100)
ConnectTime 16:59:51.275 UTC Thu Dec 11 2008
DisconnectTime 16:59:51.275 UTC Thu Dec 11 2008
CallOrigin 1
ChargedUnits 0
InfoType 2
TransmitPackets 0
TransmitBytes 0
ReceivePackets 0
ReceiveBytes 0


SprintGateWay#csim start 12146742198,,,,,,10121
csim: called number = 12146742198,,,,,,10121, loop count = 1 ping count = 0

csim err csimDisconnected recvd DISC cid(115)
csim: loop = 1, failed = 1
csim: call attempted = 1, setup failed = 1, tone failed = 0

SprintGateWay#csim start 12146742198,,,,,,10121
csim: called number = 12146742198,,,,,,10121, loop count = 1 ping count = 0

csim err csimDisconnected recvd DISC cid(116)
csim: loop = 1, failed = 1
csim: call attempted = 1, setup failed = 1, tone failed = 0

SprintGateWay#csim start 1214674219810121
csim: called number = 1214674219810121, loop count = 1 ping count = 0

csim err csimDisconnected recvd DISC cid(117)
csim: loop = 1, failed = 1
csim: call attempted = 1, setup failed = 1, tone failed = 0

SprintGateWay#csim start 12146742198#10121
csim: called number = 12146742198#10121, loop count = 1 ping count = 0

csim err csimDisconnected recvd DISC cid(118)
csim: loop = 1, failed = 1
csim: call attempted = 1, setup failed = 1, tone failed = 0

SprintGateWay#csim start 12146742198,,,10121
csim: called number = 12146742198,,,10121, loop count = 1 ping count = 0

csim err csimDisconnected recvd DISC cid(119)
csim: loop = 1, failed = 1
csim: call attempted = 1, setup failed = 1, tone failed = 0

So regardless of the #’s and (,)s I can seem to get a call through. Has
anyone had to work with this. We don’t use Call Manager only Gateway and
Gatekeepers.  Any one have any insite.

Trenton Thomas