[cisco-voip] Valcom Paging

[Voice Noob 3]

Why don't you just call Valcom Support.  They don't ask for contracts, and
you wont have to bother us with some misconfiguration on your part.

On Tue, Dec 16, 2008 at 1:26 PM, Voice Noob <voicenoob at gmail.com> wrote:

> Can anyone tell me how to wire this to the FXO? I think I have it correct
> but it is not working. On the Valcom system I have Tip1 Ring1 Control1
> Control1 . I have the tip and ring in the middle pair on the RJ-11 and the
> control on the outside pair. I get a fast busy when I call to the system.
>
>
> On Thu, Dec 11, 2008 at 7:53 PM, Truelove_John <JTruelove at aetinc.com>wrote:
>
>>  I have.  FXO to 2 Valcom 9963s.
>>
>> I have had the Valcom 9963 lock up a couple of times which stops paging.
>> Rebooting 9963 fixes the problems.
>> I put the Valcom 9963s and Valcom 2006A on a power strip to quickly power
>> cycle.
>>
>> We do a lot of paging 10,000+ pages per month on those units.
>>
>> No problems with disconnects.  I did have to adjust the gain on the FXO
>> ports
>> for volume out to the 9963s.
>>
>>
>>
>>
>> -----Original Message-----
>> From: cisco-voip-bounces at puck.nether.net on behalf of Voice Noob
>> Sent: Thu 12/11/2008 4:22 PM
>> To: cisco-voip at puck.nether.net
>> Subject: [cisco-voip] Valcom Paging
>>
>> I have a customer that has a Valcom V-2924A with a Valcom V-9963 Digital
>> Feedback Eliminator
>>
>> What type of connection would I use on the router? FXS or FXO ? Has anyone
>> integrated with these? Are there any problems with disconnect or anything
>> else to watch out for. Thanks for your help.
>>
>>
>>
>>
>>
>>
>>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081216/40bba9da/attachment.html>