[cisco-voip] Valcom Paging

[Beck, Christopher]

I am not sure who you are or what your issue is, but I am sure that many
others are of the same opinion I am...  That being we don't have the
time nor do we need this type of traffic clogging the list.

 

If you aren't being constructive, then help everyone out and be quiet.

 

Chris Beck

IT Lead - Voice Technologies

USG Corporation

312-436-4541 (office)

312-730-5524 (Mobile)

312-672-7714 (FAX)

cbeck at usg.com

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voice Noob 3
Sent: Tuesday, December 16, 2008 3:42 PM
To: Voice Noob
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Valcom Paging

 

Why don't you just call Valcom Support.  They don't ask for contracts,
and you wont have to bother us with some misconfiguration on your part.

On Tue, Dec 16, 2008 at 1:26 PM, Voice Noob <voicenoob at gmail.com> wrote:

Can anyone tell me how to wire this to the FXO? I think I have it
correct but it is not working. On the Valcom system I have Tip1 Ring1
Control1 Control1 . I have the tip and ring in the middle pair on the
RJ-11 and the control on the outside pair. I get a fast busy when I call
to the system. 

 

On Thu, Dec 11, 2008 at 7:53 PM, Truelove_John <JTruelove at aetinc.com>
wrote:

I have.  FXO to 2 Valcom 9963s.

I have had the Valcom 9963 lock up a couple of times which stops paging.
Rebooting 9963 fixes the problems.
I put the Valcom 9963s and Valcom 2006A on a power strip to quickly
power cycle.

We do a lot of paging 10,000+ pages per month on those units.

No problems with disconnects.  I did have to adjust the gain on the FXO
ports
for volume out to the 9963s. 





-----Original Message-----
From: cisco-voip-bounces at puck.nether.net on behalf of Voice Noob
Sent: Thu 12/11/2008 4:22 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Valcom Paging

I have a customer that has a Valcom V-2924A with a Valcom V-9963 Digital
Feedback Eliminator

What type of connection would I use on the router? FXS or FXO ? Has
anyone
integrated with these? Are there any problems with disconnect or
anything
else to watch out for. Thanks for your help.







 


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 



Confidentiality Notice: This email is intended for the sole use of the intended recipient(s) and may contain confidential, proprietary or privileged information. If you are not the intended recipient, you are notified that any use, review, dissemination, copying or action taken based on this message or its attachments, if any, is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy or delete all copies of the original message and any attachments. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081216/851196b0/attachment.html>