[cisco-voip] Valcom Paging

[Truelove_John]

This is from memory.

 

I just used 2 wires to FXO (middle of RJ11), sounds like you have that
part right.

Didn't use control1, then connected to TIP/RING # 1.

 

You will also need to get you SW settings correct.  I think it was SW1
that I had to change.

If I remember correctly, something was backward from the way that I was
thinking and I had to change it.

 

I called Valcom support and they were very helpful.

 

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voice Noob
Sent: Tuesday, December 16, 2008 4:27 PM
To: Truelove_John
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Valcom Paging

 

Can anyone tell me how to wire this to the FXO? I think I have it
correct but it is not working. On the Valcom system I have Tip1 Ring1
Control1 Control1 . I have the tip and ring in the middle pair on the
RJ-11 and the control on the outside pair. I get a fast busy when I call
to the system. 

 

On Thu, Dec 11, 2008 at 7:53 PM, Truelove_John <JTruelove at aetinc.com>
wrote:

I have.  FXO to 2 Valcom 9963s.

I have had the Valcom 9963 lock up a couple of times which stops paging.
Rebooting 9963 fixes the problems.
I put the Valcom 9963s and Valcom 2006A on a power strip to quickly
power cycle.

We do a lot of paging 10,000+ pages per month on those units.

No problems with disconnects.  I did have to adjust the gain on the FXO
ports
for volume out to the 9963s. 





-----Original Message-----
From: cisco-voip-bounces at puck.nether.net on behalf of Voice Noob
Sent: Thu 12/11/2008 4:22 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Valcom Paging

I have a customer that has a Valcom V-2924A with a Valcom V-9963 Digital
Feedback Eliminator

What type of connection would I use on the router? FXS or FXO ? Has
anyone
integrated with these? Are there any problems with disconnect or
anything
else to watch out for. Thanks for your help.







 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081216/e5ed7c8d/attachment.html>