[cisco-voip] CUCM server from 6.1.1.2000-3 to 6.1.3.1000-16.

[Jason Burns]

If this is a production system you should upload licenses. If you purchased
all of the equipment and software through normal methods you should have a
PAK that you can upload to the Cisco site. Once you enter the PAK you should
get licenses in the email.

This is all covered in the CallManager docs under licensing:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmsys/a02licen.html

On Sat, Dec 20, 2008 at 8:24 PM, Cool Boy <collboy80 at yahoo.com> wrote:

> Hi All,
>
>
>
> I have upgraded the CUCM server from 6.1.1.2000-3  to  6.1.3.1000-16. After
> finishing the upgrade,  I am getting the below message on the main web page
> of the CUCM
>
> * *
>
> *Cisco Unified CM Administration*
>
> *System version: 6.1.3.1000-16*
>
> *Licensing Warnings: *
>
> *System is operating on Demo licenses. Please upload relevant license
> files.*
>
>
>
> Under the license report, the status is demo for *CCM Node License Feature
> *.
>
>
>
> I have checked all the phones, they are registered with CUCM, Voice mail,
> UCCX servers are working fine. I do not have any issue.
>
>
>
> According to CUCM 6.1.3 release notes, it is an enhancement in licensing
> which identifies the state of a  license.
>
>
>
> My question: Should I leave it as it is or I need to buy a license?
>
> ------------------------------
> Stay connected to the people that matter most with a smarter inbox. Take a
> look<http://au.rd.yahoo..com/galaxy/mail/tagline2/*http://au.docs.yahoo.com/mail/smarterinbox>
> .
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081220/d4da13cf/attachment.html>