[cisco-voip] sip:user@<CCM>.domain

[matthew.richards at nominet.org.uk]

Does this use the username to dial or would this be the digest user? or 
does 6.x have some other setup for this?

Thanks for your reply.

Matt

"Aman Chugh" <aman.chugh at gmail.com> wrote on 23/12/2008 11:37:03:

> domain routing is also available in 6.x.  Sip route patterns are 
> available in 6.x which support domain routing.
> 
> 
> HTH
> 
> Aman

> On Tue, Dec 23, 2008 at 4:02 PM, <matthew.richards at nominet.org.uk> 
wrote:
> Morning
> 
> I'd like to know if Call manager can accept calls from
> sip:<name>@<CCM>.domain? sip:<ext>@<CCM>.domain works fine I've spoken 
to
> a few people regarding this and most suggest that its not possible.
> 
> I'm running 5.1.x is this possible with later versions of CCM maybe in
> 7.x? or to do this do I have to get my SBC to translate the dialled
> name/number?
> 
> Can anyone help?
> 
> Thanks
> 
> Matt Richards
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip