[cisco-voip] sip:user@<CCM>.domain

[Aman Chugh]

This link shows how it is configured in 6.X

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmcfg/b03siprp.html

Aman

On Tue, Dec 23, 2008 at 5:18 PM, <matthew.richards at nominet.org.uk> wrote:

> Does this use the username to dial or would this be the digest user? or
> does 6.x have some other setup for this?
>
> Thanks for your reply.
>
> Matt
>
> "Aman Chugh" <aman.chugh at gmail.com> wrote on 23/12/2008 11:37:03:
>
> > domain routing is also available in 6.x.  Sip route patterns are
> > available in 6.x which support domain routing.
> >
> >
> > HTH
> >
> > Aman
>
> > On Tue, Dec 23, 2008 at 4:02 PM, <matthew.richards at nominet.org.uk>
> wrote:
> > Morning
> >
> > I'd like to know if Call manager can accept calls from
> > sip:<name>@<CCM>.domain? sip:<ext>@<CCM>.domain works fine I've spoken
> to
> > a few people regarding this and most suggest that its not possible.
> >
> > I'm running 5.1.x is this possible with later versions of CCM maybe in
> > 7.x? or to do this do I have to get my SBC to translate the dialled
> > name/number?
> >
> > Can anyone help?
> >
> > Thanks
> >
> > Matt Richards
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081223/63802f50/attachment.html>