[cisco-voip] Need suggestion with Video Conferencing setup

[Syed Khalid Ali]

I don't have any experience with Video Conferencing except one that I
mentioned inmy previous email.

Not looking for Cisco VTA or something similar. I need to setup video
conferencing for 8-10 users in a conference room in site-A and 1-user
in site-B. So need suggestions on the following:

1- Should I go with Polycom or Tandberg
    1.1 What features should I look for
2- Bandwidth requirement.


On Wed, Dec 24, 2008 at 12:54 AM, Scott Voll <svoll.voip at gmail.com> wrote:
> please explain what your looking to do.
>
> if it's just simple phone to phone stuff, VTA works good.  you will need to
> setup a MCU (which is not cheap) for any thing more then point to point.
>
> Scott
>
> On Tue, Dec 23, 2008 at 2:29 AM, Syed Khalid Ali
> <syed.khalid.khursheed at gmail.com> wrote:
>>
>> Dear all,
>>
>> One of our client want to go for Video Conferencing setup. I need
>> suggestion or feedback if some one already have.
>> Running CCM 4.2(3) and IPCCX 4.0.
>>
>> A few month earlier I had a chance to setup Video Conferencing with
>> Polycom HD 9000 series but all in vain. After doing some research I
>> found out that IOS had some NAT caveat(s) that was unresolved.
>>
>> So I am in doubt what to do!
>> --
>> Thanks,
>> Syed Khalid Ali
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>



-- 
Thanks,
Syed Khalid Ali