[cisco-voip] Same Trunk on Both Side

[Ramiz Sardar]

Still Waiting.......

On Jan 31, 2008 9:04 PM, Ramiz Sardar <ramizchaudhary at gmail.com> wrote:

> Friends,
>
> I am currently working on voip setup. My topology you can see below:
>
> PhoneA----- PBX 1----------(2 PRI)-------Router1-----------Router2------(2
> PRI)---PBX2---------PhoneB
>
> As you can see that Routers are connect with PBXs through 2 E1 PRIs. I
> want to make configuration so that if a call come from first pri (trunk) on
> Router 1, on Router2 it most go on first pri  (trunk) that is connect to
> PBX2 and same for second pri. Means If i recieve call from PBX1 on port
> 1/0:15 then i could tag it some how and and Router 2 recieve that call, it
> send it you its port 1/0:15 and same for second port 1/1:15 on both side.
> Tell me the way how can i do that.
>
> Waiting for positive immediate response..
>
> Best Regards
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080201/912aea1c/attachment-0001.html