[cisco-voip] Port Selection Based On Calling Number

[SR IRWMA]

 Friends,

I have connected two routers with pbxs through pri. Router A is connect with
PBX1 through 2 PRI (in router it shows port 1/0:15 for first PRI and port
1/1:15 for second PRI. You can see my topology below:


Phone(2001)-------PBX1------(2PRI)-----Router1-----------Router2-----(1PRI)-------PBX2-------Phones
(3001,5001)

I need to do so that if Phone 3001 of PBX2 call phone 2001 of PBX1 then
router1 forward call on PRI port 1/0:15 but if Phone 5001 call the same
Phone 2001 then router1 forward call on second port 1/1:15.

I tried number of combinations of destination-patern, incoming called-number
and answer-address but couldn't acheive the results. I need your help...

Best Regards
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080201/db765345/attachment.html