[cisco-voip] Port Selection Based On Calling Number

[Ryan Ratliff]

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_exampl
e09186a00801c0a88.shtml
 

-Ryan 

 

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of SR IRWMA
Sent: Friday, February 01, 2008 4:25 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Port Selection Based On Calling Number




 Friends,

I have connected two routers with pbxs through pri. Router A is connect with
PBX1 through 2 PRI (in router it shows port 1/0:15 for first PRI and port
1/1:15 for second PRI. You can see my topology below: 


Phone(2001)-------PBX1------(2PRI)-----Router1-----------Router2-----(1PRI)-
------PBX2-------Phones (3001,5001)

I need to do so that if Phone 3001 of PBX2 call phone 2001 of PBX1 then
router1 forward call on PRI port 1/0:15 but if Phone 5001 call the same
Phone 2001 then router1 forward call on second port 1/1:15.

I tried number of combinations of destination-patern, incoming called-number
and answer-address but couldn't acheive the results. I need your help...
 
Best Regards
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080201/3e218824/attachment.html