[cisco-voip] CUPS 6.0 and UCCM 6.1

[Voice Noob]

Yes I am AD integrated. I changed the port number and still no change. I did
not have the inbound ACL and when I changed that I was able to change my
stats to available which I was not able to do before but I am still not able
to choose my desk phone. It still says feature not available.

On Feb 2, 2008 4:10 AM, <Motivator77 at gmx.de> wrote:

> Hi,
>
> did you configer the inbound ACL in Presence? Does it include the IP
> address of your PC where CUPC is running?
>
>
> HTH
>
>
> -------- Original-Nachricht --------
> > Datum: Fri, 1 Feb 2008 17:11:26 -0600
> > Von: "Bill Talley" <billt at aos5.com>
> > An: "Voice Noob" <voicenoob at gmail.com>
> > CC: cisco-voip at puck.nether.net
> > Betreff: Re: [cisco-voip] CUPS 6.0 and UCCM 6.1
>
> > You're AD integrated?  If so, if UCM LDAP authentication is set to use
> > port
> > 389, change it to 3268.  This queries the GC and provides a faster
> > response.
> > Otherwise you might encounter a timeout issue and CTI authentication
> > fails.
> >
> >   _____
> >
> > From: Voice Noob [mailto:voicenoob at gmail.com]
> > Sent: Friday, February 01, 2008 4:52 PM
> > To: Bill Talley
> > Cc: cisco-voip at puck.nether.net
> > Subject: Re: [cisco-voip] CUPS 6.0 and UCCM 6.1
> >
> >
> > Yes on Sip trunk. Red is Presense = Failed to connect Invalid
> Credentials.
> > Desk Phone = Disconnecting (pending retry).
> >
> > Only thing in troubleshooter is a certificate for exchange notification.
> >
> > On Feb 1, 2008 4:46 PM, Bill Talley <billt at aos5.com> wrote:
> >
> >
> > Do you have the SIP trunk configured between UCM and CUPS?
> >
> > In CUPC, under help>>>show server health,  are there any red ?
> >
> >   _____
> >
> > From: Voice Noob [mailto:voicenoob at gmail.com]
> > Sent: Friday, February 01, 2008 4:38 PM
> > To: Bill Talley
> > Cc: cisco-voip at puck.nether.net
> >
> > Subject: Re: [cisco-voip] CUPS 6.0 and UCCM 6.1
> >
> >
> > Here is a screen print of the user setting page. I have everything
> > associated in CUCM.
> >
> >
> > On Feb 1, 2008 3:54 PM, Bill Talley <billt at aos5.com> wrote:
> >
> >
> > Ensure the DN on the phone in UCM is associated to the user and under
> the
> > user account that the user is associated to the phone, has a primary
> > extension configured and it assigned to the Standard CTI Enabled group.
> >
> > Also, in CUPS ensure the primary device is defined and appropriate
> > profiles
> > are configured for the Personal Communicator user account.
> >
> > HTH.
> >
> >   _____
> >
> > From: cisco-voip-bounces at puck.nether.net
> > [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voice Noob
> > Sent: Friday, February 01, 2008 3:38 PM
> > To: cisco-voip at puck.nether.net
> > Subject: Re: [cisco-voip] CUPS 6.0 and UCCM 6.1
> >
> >
> > Inside CUPC I go to file, phone mode and try to select choose phone to
> > control it is grayed out and says feature not available.
> >
> >
> > On Feb 1, 2008 3:05 PM, Voice Noob <voicenoob at gmail.com> wrote:
> >
> >
> > I am evaluating CUPS 6.0 currently. I can log into the CUPC client but
> the
> > call control does not work. I can not go into deskphone and all of the
> > settings are greyed out. I have went through the configuration guides
> and
> > the troubleshooting guides but I can not make any headway and getting
> this
> > to work. Does anyone have this working that can give me some things to
> > try?
> >
> >
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080203/ba3b7af0/attachment.html