[cisco-voip] CUPS 6.0 and UCCM 6.1

[Motivator77 at gmx.de]

Hi,

did you configer the inbound ACL in Presence? Does it include the IP address of your PC where CUPC is running?


HTH 


-------- Original-Nachricht --------
> Datum: Fri, 1 Feb 2008 17:11:26 -0600
> Von: "Bill Talley" <billt at aos5.com>
> An: "Voice Noob" <voicenoob at gmail.com>
> CC: cisco-voip at puck.nether.net
> Betreff: Re: [cisco-voip] CUPS 6.0 and UCCM 6.1

> You're AD integrated?  If so, if UCM LDAP authentication is set to use
> port
> 389, change it to 3268.  This queries the GC and provides a faster
> response.
> Otherwise you might encounter a timeout issue and CTI authentication
> fails. 
> 
>   _____  
> 
> From: Voice Noob [mailto:voicenoob at gmail.com] 
> Sent: Friday, February 01, 2008 4:52 PM
> To: Bill Talley
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] CUPS 6.0 and UCCM 6.1
> 
> 
> Yes on Sip trunk. Red is Presense = Failed to connect Invalid Credentials.
> Desk Phone = Disconnecting (pending retry).
>  
> Only thing in troubleshooter is a certificate for exchange notification.
> 
> On Feb 1, 2008 4:46 PM, Bill Talley <billt at aos5.com> wrote:
> 
> 
> Do you have the SIP trunk configured between UCM and CUPS?
>  
> In CUPC, under help>>>show server health,  are there any red ?
> 
>   _____  
> 
> From: Voice Noob [mailto:voicenoob at gmail.com] 
> Sent: Friday, February 01, 2008 4:38 PM
> To: Bill Talley
> Cc: cisco-voip at puck.nether.net 
> 
> Subject: Re: [cisco-voip] CUPS 6.0 and UCCM 6.1
> 
> 
> Here is a screen print of the user setting page. I have everything
> associated in CUCM. 
> 
> 
> On Feb 1, 2008 3:54 PM, Bill Talley <billt at aos5.com> wrote:
> 
> 
> Ensure the DN on the phone in UCM is associated to the user and under the
> user account that the user is associated to the phone, has a primary
> extension configured and it assigned to the Standard CTI Enabled group.
>  
> Also, in CUPS ensure the primary device is defined and appropriate
> profiles
> are configured for the Personal Communicator user account.
>  
> HTH.
> 
>   _____  
> 
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voice Noob
> Sent: Friday, February 01, 2008 3:38 PM
> To: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] CUPS 6.0 and UCCM 6.1
> 
> 
> Inside CUPC I go to file, phone mode and try to select choose phone to
> control it is grayed out and says feature not available. 
> 
> 
> On Feb 1, 2008 3:05 PM, Voice Noob <voicenoob at gmail.com> wrote:
> 
> 
> I am evaluating CUPS 6.0 currently. I can log into the CUPC client but the
> call control does not work. I can not go into deskphone and all of the
> settings are greyed out. I have went through the configuration guides and
> the troubleshooting guides but I can not make any headway and getting this
> to work. Does anyone have this working that can give me some things to
> try? 
> 
> 
> 
>