[cisco-voip] Unity 4.2 DCOM error...

[Jonathan Charles]

Latest permissions wizard fixed it...

You know, I was wondering if it was this wacky version of Windows 2003
(Appliance Edition?!?) but the DCOM errors are gone and Unity starts
fine (even with CSA enabled)



Jonathan

On Feb 3, 2008 9:31 AM, Jonathan Charles <jonvoip at gmail.com> wrote:
> OK, I will try that today... any other ideas...
>
>
> Jonathan
>
>
> On Feb 3, 2008 5:26 AM, Mark Noble <Mark.Noble at comstor.co.uk> wrote:
> > have you checked the account permissions? try running permission wizard again
> >
> > -----------------------------------------------------------------------
> >
> > Mark Noble
> > Principal Network Consultant
> >
> > Comstor UK - a division of Westcon Group European Operations Ltd.
> > Mobile: +44 (0) 7990 533071
> > Email: mark.noble at comstor.co.uk
> > http://www.comstor.co.uk
> >
> >
> >
> > -----Original Message-----
> > From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jonathan Charles
> > Sent: 03 February 2008 07:45
> > To: Scott Voll
> > Cc: Cisco VoIPoE List
> > Subject: Re: [cisco-voip] Unity 4.2 DCOM error...
> >
> > This was a clean install, using the Unity 2003 platform discs (Windows
> > 2003 Appliance Edition)...
> >
> > I am really at a loss here...
> >
> >
> >
> > Jonathan
> >
> > On Feb 1, 2008 2:37 PM, Jonathan Charles <jonvoip at gmail.com> wrote:
> > > Yeah, i disabled CSA, and still got the same errors....
> > >
> > >
> > > Jonathan
> > >
> > >
> > > On Feb 1, 2008 2:14 PM, Scott Voll <svoll.voip at gmail.com> wrote:
> > > > Turn off CSA and try to start.
> > > >
> > > > I've had problem in the past like that and that usually helped.
> > > >
> > > > Scott
> > > >
> > > >
> > > >
> > > > On Feb 1, 2008 11:55 AM, Jonathan Charles <jonvoip at gmail.com> wrote:
> > > >
> > > > >
> > > > >
> > > > >
> > > > > Getting this error on bootup and Unity will not start:
> > > > >
> > > > > DCOM Got error "The service did not respond to the start or control
> > > > > request in a timely fashion" attempting to start the service
> > > > > AvCsGateway with arguments "-Service" in order to run the server.
> > > > >
> > > > > Then some hex dump...
> > > > >
> > > > > You cannot start Unity manually, it is a vmail only box and Exchange is
> > > > up...
> > > > >
> > > > >
> > > > > Any ideas?
> > > > >
> > > > >
> > > > >
> > > > > Jonathan
> > > > > _______________________________________________
> > > > > cisco-voip mailing list
> > > > > cisco-voip at puck.nether.net
> > > > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > > > >
> > > >
> > > >
> > >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> > **********************************************************************************************
> > Notice:  The information transmitted in this e-mail message and any attachments are solely for the intended
> > recipient and may contain confidential or privileged information.  If you are not the intended recipient, any
> > review, transmission, dissemination or other use of this information is prohibited.  If you have received this
> > communication in error, please notify the sender immediately and delete the material from any computer,
> > including any copies.
> > **********************************************************************************************
> >
> >
>