[cisco-voip] Unity 4.2 DCOM error...

[Jonathan Charles]

Oh, I also made the UnityDirSvc acct a domain admin...


Jonathan

On Feb 3, 2008 1:16 PM, Jonathan Charles <jonvoip at gmail.com> wrote:
> Latest permissions wizard fixed it...
>
> You know, I was wondering if it was this wacky version of Windows 2003
> (Appliance Edition?!?) but the DCOM errors are gone and Unity starts
> fine (even with CSA enabled)
>
>
>
> Jonathan
>
>
> On Feb 3, 2008 9:31 AM, Jonathan Charles <jonvoip at gmail.com> wrote:
> > OK, I will try that today... any other ideas...
> >
> >
> > Jonathan
> >
> >
> > On Feb 3, 2008 5:26 AM, Mark Noble <Mark.Noble at comstor.co.uk> wrote:
> > > have you checked the account permissions? try running permission wizard again
> > >
> > > -----------------------------------------------------------------------
> > >
> > > Mark Noble
> > > Principal Network Consultant
> > >
> > > Comstor UK - a division of Westcon Group European Operations Ltd.
> > > Mobile: +44 (0) 7990 533071
> > > Email: mark.noble at comstor.co.uk
> > > http://www.comstor.co.uk
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jonathan Charles
> > > Sent: 03 February 2008 07:45
> > > To: Scott Voll
> > > Cc: Cisco VoIPoE List
> > > Subject: Re: [cisco-voip] Unity 4.2 DCOM error...
> > >
> > > This was a clean install, using the Unity 2003 platform discs (Windows
> > > 2003 Appliance Edition)...
> > >
> > > I am really at a loss here...
> > >
> > >
> > >
> > > Jonathan
> > >
> > > On Feb 1, 2008 2:37 PM, Jonathan Charles <jonvoip at gmail.com> wrote:
> > > > Yeah, i disabled CSA, and still got the same errors....
> > > >
> > > >
> > > > Jonathan
> > > >
> > > >
> > > > On Feb 1, 2008 2:14 PM, Scott Voll <svoll.voip at gmail.com> wrote:
> > > > > Turn off CSA and try to start.
> > > > >
> > > > > I've had problem in the past like that and that usually helped.
> > > > >
> > > > > Scott
> > > > >
> > > > >
> > > > >
> > > > > On Feb 1, 2008 11:55 AM, Jonathan Charles <jonvoip at gmail.com> wrote:
> > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > Getting this error on bootup and Unity will not start:
> > > > > >
> > > > > > DCOM Got error "The service did not respond to the start or control
> > > > > > request in a timely fashion" attempting to start the service
> > > > > > AvCsGateway with arguments "-Service" in order to run the server.
> > > > > >
> > > > > > Then some hex dump...
> > > > > >
> > > > > > You cannot start Unity manually, it is a vmail only box and Exchange is
> > > > > up...
> > > > > >
> > > > > >
> > > > > > Any ideas?
> > > > > >
> > > > > >
> > > > > >
> > > > > > Jonathan
> > > > > > _______________________________________________
> > > > > > cisco-voip mailing list
> > > > > > cisco-voip at puck.nether.net
> > > > > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > > > > >
> > > > >
> > > > >
> > > >
> > > _______________________________________________
> > > cisco-voip mailing list
> > > cisco-voip at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > > **********************************************************************************************
> > > Notice:  The information transmitted in this e-mail message and any attachments are solely for the intended
> > > recipient and may contain confidential or privileged information.  If you are not the intended recipient, any
> > > review, transmission, dissemination or other use of this information is prohibited.  If you have received this
> > > communication in error, please notify the sender immediately and delete the material from any computer,
> > > including any copies.
> > > **********************************************************************************************
> > >
> > >
> >
>