[cisco-voip] how to get name and number to show

[Kathy Dupree]

I have been trying to figure out what it is in Call Manager that has to
be changed so the Name of the College and the DID you are calling from
will show on the caller id of the called party.  I have spoken with
ntelos who provides our DIDs and local service.  They have done what
needs to be done on their end.  I had called TAC and a few months ago
about getting this done in Call Manager but it is not working.  I looked
under Service Parameters Configuration, then under clusterwide
paramaters (PRI and MGCP Gateway).  There is something there called
Calling Party number screening indicator.  That is set for the default,
CallManager sets the screening indicator value.  One option is, calling
number not screened.  Should I change that or should I call TAC again?
Thanks

 

Katherine O. Dupree

Telecommunications Support/Infrastructure Coordinator

Randolph College

2500 Rivermont Ave. 

Lynchburg, Va.  24503

Main 243

kdupree at randolphcollege.edu <mailto:kdupree at rmwc.edu> 

(434) 947 8371

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080205/7ae518e5/attachment.html