[cisco-voip] how to get name and number to show

[Jonathan Charles]

What is your ISDN switch-type set to?

Also, do a debug isdn q931 and see what is being sent/received... if
the name and number are there, they should be on the phone...


Jonathan

On Feb 5, 2008 3:27 PM, Kathy Dupree <KDupree at randolphcollege.edu> wrote:
>
>
>
>
> I have been trying to figure out what it is in Call Manager that has to be
> changed so the Name of the College and the DID you are calling from will
> show on the caller id of the called party.  I have spoken with ntelos who
> provides our DIDs and local service.  They have done what needs to be done
> on their end.  I had called TAC and a few months ago about getting this done
> in Call Manager but it is not working.  I looked under Service Parameters
> Configuration, then under clusterwide paramaters (PRI and MGCP Gateway).
> There is something there called Calling Party number screening indicator.
> That is set for the default, CallManager sets the screening indicator value.
> One option is, calling number not screened.  Should I change that or should
> I call TAC again?   Thanks
>
>
>
> Katherine O. Dupree
>
> Telecommunications Support/Infrastructure Coordinator
>
> Randolph College
>
> 2500 Rivermont Ave.
>
> Lynchburg, Va.  24503
>
> Main 243
>
> kdupree at randolphcollege.edu
>
> (434) 947 8371
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>