[cisco-voip] multiple auto-attendant scripts on NME-CUE

[Lelio Fulgenzi]

I'd like to be able to run multiple auto-attendant scripts on an NME-CUE module. Is this possible?

Basically, I'd like to decommission a couple of MCS servers that we are running IPIVR 3.5 (or something) on as our backup auto-attendant and move these over to a few 3845s we are planning on purchasing outfitted with NME-CUE modules.

Here's the wrinkle, I'd also like to run a system down autoattendant that kicks in when the routers lose connectivity with the cluster, i.e. system down and trunks register via H323/SRST.

And I'd like both scripts to be able to use the maximum number of ports, since only one will usually be active at once.

I'm pretty sure I can do this according to what I see on my AIM-CUE gui.

Comments?
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo."      WJR
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080206/9c855d6c/attachment.html