[cisco-voip] multiple auto-attendant scripts on NME-CUE

[Matthew Saskin]

As for running multiple AA scripts, it's just a matter of uploading the 
multiple .aef files to the CUE module.  Since you want to run them only 
when the site is in SRST mode, it should just be a matter of properly 
configuring the SIP subsystem on the CUE, setting up the triggers, and 
proper configuration of the dial-peers on the host router to send the 
calls to the proper trigger/auto-attendant.

-matt

Lelio Fulgenzi wrote:
> I'd like to be able to run multiple auto-attendant scripts on an NME-CUE 
> module. Is this possible?
>  
> Basically, I'd like to decommission a couple of MCS servers that we are 
> running IPIVR 3.5 (or something) on as our backup auto-attendant and 
> move these over to a few 3845s we are planning on purchasing outfitted 
> with NME-CUE modules.
>  
> Here's the wrinkle, I'd also like to run a system down autoattendant 
> that kicks in when the routers lose connectivity with the cluster, i.e. 
> system down and trunks register via H323/SRST.
>  
> And I'd like both scripts to be able to use the maximum number of ports, 
> since only one will usually be active at once.
>  
> I'm pretty sure I can do this according to what I see on my AIM-CUE gui.
>  
> Comments?
> --------------------------------------------------------------------------------
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo."      WJR
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip