[cisco-voip] 7961 with 7914 not getting power...

[Paul Choi]

I've never seen a 7914 that takes power from the
phone. . . 

One oddball thing I discovered is that if you have two
7914 modules attached, you still only need one power
supply for the middle module and not the outer module.
I just experienced this with CCME 4.1.

Paul

--- Ryan Ratliff <rratliff at cisco.com> wrote:

> What doc says it should work?  The 7914 has always
> required an  
> external power supply.
> 
> -Ryan
> 
> On Feb 7, 2008, at 1:13 PM, Jonathan Charles wrote:
> 
> We just deployed a 7961 and ONE 7914, and the 7914
> is not getting
> power from the phone... and it only works if we use
> an external power
> supply...
> 
> Doco says that it should work, and it has in the
> past, what is going on?
> 
> CCM is 5.1.3a
> 
> 
> 
> 
> Jonathan
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 



      ____________________________________________________________________________________
Looking for last minute shopping deals?  
Find them fast with Yahoo! Search.  http://tools.search.yahoo.com/newsearch/category.php?category=shopping