[cisco-voip] 7961 with 7914 not getting power...

[Jonathan Charles]

I just reread the doc, it says that if you are using an external power
supply on the phone, you can get away with one 7914 free.... if you
are using two you need two...

However, if you are using inline power, you need a power supply for
the first 7914...

This sucks...


Jonathan

On Feb 7, 2008 1:27 PM, Paul Choi <asobihoudai at yahoo.com> wrote:
> I've never seen a 7914 that takes power from the
> phone. . .
>
> One oddball thing I discovered is that if you have two
> 7914 modules attached, you still only need one power
> supply for the middle module and not the outer module.
> I just experienced this with CCME 4.1.
>
> Paul
>
>
> --- Ryan Ratliff <rratliff at cisco.com> wrote:
>
> > What doc says it should work?  The 7914 has always
> > required an
> > external power supply.
> >
> > -Ryan
> >
> > On Feb 7, 2008, at 1:13 PM, Jonathan Charles wrote:
> >
> > We just deployed a 7961 and ONE 7914, and the 7914
> > is not getting
> > power from the phone... and it only works if we use
> > an external power
> > supply...
> >
> > Doco says that it should work, and it has in the
> > past, what is going on?
> >
> > CCM is 5.1.3a
> >
> >
> >
> >
> > Jonathan
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>
>
>
>       ____________________________________________________________________________________
> Looking for last minute shopping deals?
> Find them fast with Yahoo! Search.  http://tools.search.yahoo.com/newsearch/category.php?category=shopping
>