[cisco-voip] CM6.1 Hostname vs. UCM Name

[Carter, Bill]

What is strange is at the CLI level there is the new hostname.  The CM
Admin, UCM Manager Name is still the old.

-----Original Message-----
From: Wes Sisk [mailto:wsisk at cisco.com] 
Sent: Thursday, February 14, 2008 1:15 PM
To: Carter, Bill
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CM6.1 Hostname vs. UCM Name

That process is sketchy at best.  Vaguely I recall it required:
1. DMA of 4.x database
2. install 5.x for windows migration
3. during install set new hostname but original IP address
4. during DMA import phase it should reconcile the old/new name
5. after final reboot your system should show the new hostname and then 
you can change IP at will.

if you already have a working system it is too late to change the 
hostname.  Lots of dangerous fun here:
CSCsj89934.

Reference to process here:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/upgrade/5_1/upgrd511.
html#wp46919

This captures the request: CSCsc73821.  I believe this should be 
resolved with the above process. I'm following up with the owner to
confirm.

/Wes

Carter, Bill wrote:
> I upgraded from 4.1 to 6.1.  The 4.1 server was named CCM1. According
to
> the DMA installation guide, I could change the hostname of CallManager
> and everything would be updated...So I did.....
>
> At the CLI level server host name is UCM1
>
> In UCM Administration I have
>
> System -> Server 192.168.X.X.  
>
> System -> Cisco Unified CM 
> "Cisco Unified Communications Manager Server 192.168.X.X"
> "Cisco Unified Communications Manager Name CCM1"
>
>
> Through UCM Admin, can I change UCM Name from CCM1 to UCM1 ?
>
>
> Bill Carter
> Sr. Business Communications Analyst
> CCIE 5022
> Sentinel Technologies
> (O) 217.391.5015
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>