[cisco-voip] vg224 dialpeers

[Paul Choi]

You can either shut the dial peer down or simply not
create a dial peer for that port.



--- Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

> never mind #2, forgot adding a DN is a seperate
> task. 
> 
> still wondering about shutting down the port though.
> 
> Lelio
>
--------------------------------------------------------------------------------
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph *
> Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> 
> "Buffalo buffalo Buffalo buffalo buffalo buffalo
> Buffalo buffalo."      WJR
> 
>   ----- Original Message ----- 
>   From: Lelio Fulgenzi 
>   To: Ryan Ratliff ; 'Cisco Voyp List' 
>   Sent: Thursday, February 14, 2008 4:03 PM
>   Subject: Re: [cisco-voip] vg224 dialpeers
> 
> 
>   Thanks Wes and Ryan. Two questions...
>     a.. if i configure dial-peers for each port and
> then just shut down the port, is that sufficient? 
>     b.. how do i configure the ports in CCM without
> a DN?
>   Lelio
>  
>
--------------------------------------------------------------------------------
>   Lelio Fulgenzi, B.A.
>   Senior Analyst (CCS) * University of Guelph *
> Guelph, Ontario N1G 2W1
>   (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>  
>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> 
>   "Buffalo buffalo Buffalo buffalo buffalo buffalo
> Buffalo buffalo."      WJR
> 
>     ----- Original Message ----- 
>     From: Ryan Ratliff 
>     To: 'Lelio Fulgenzi' ; 'Cisco Voyp List' 
>     Sent: Thursday, February 14, 2008 3:33 PM
>     Subject: RE: [cisco-voip] vg224 dialpeers
> 
> 
>     I'd guess they will cause transients and enough
> of these can cause an impact to the server,
> depending on how fast the devices are trying to
> register.
>     Just as with a VG248 I'd very much recommend
> shutting down any ports not in use.  Alternatively
> you can configure them in CCM but not give them a
> DN.
> 
>     -Ryan 
> 
> 
> 
> 
> 
>
----------------------------------------------------------------------------
>     From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On
> Behalf Of Lelio Fulgenzi
>     Sent: Thursday, February 14, 2008 3:05 PM
>     To: Cisco Voyp List
>     Subject: [cisco-voip] vg224 dialpeers
> 
> 
>     In order to get a vg224 port to register I had
> to put:
> 
>     dial-peer voice 223 pots
>      service stcapp
>      port 2/23
> 
>     Is there any caveat with putting this on all
> ports whether they are configured in CCM or not? If
> I do, do they result in transient connections?
> 
>     Lelio
>    
>
--------------------------------------------------------------------------------
>     Lelio Fulgenzi, B.A.
>     Senior Analyst (CCS) * University of Guelph *
> Guelph, Ontario N1G 2W1
>     (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>    
>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> 
>     "Buffalo buffalo Buffalo buffalo buffalo buffalo
> Buffalo buffalo."      WJR
> > _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 



      ____________________________________________________________________________________
Looking for last minute shopping deals?  
Find them fast with Yahoo! Search.  http://tools.search.yahoo.com/newsearch/category.php?category=shopping