[cisco-voip] vg224 dialpeers

[Lelio Fulgenzi]

never mind #2, forgot adding a DN is a seperate task. 

still wondering about shutting down the port though.

Lelio
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo."      WJR

  ----- Original Message ----- 
  From: Lelio Fulgenzi 
  To: Ryan Ratliff ; 'Cisco Voyp List' 
  Sent: Thursday, February 14, 2008 4:03 PM
  Subject: Re: [cisco-voip] vg224 dialpeers


  Thanks Wes and Ryan. Two questions...
    a.. if i configure dial-peers for each port and then just shut down the port, is that sufficient? 
    b.. how do i configure the ports in CCM without a DN?
  Lelio
  --------------------------------------------------------------------------------
  Lelio Fulgenzi, B.A.
  Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
  (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
  "Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo."      WJR

    ----- Original Message ----- 
    From: Ryan Ratliff 
    To: 'Lelio Fulgenzi' ; 'Cisco Voyp List' 
    Sent: Thursday, February 14, 2008 3:33 PM
    Subject: RE: [cisco-voip] vg224 dialpeers


    I'd guess they will cause transients and enough of these can cause an impact to the server, depending on how fast the devices are trying to register.
    Just as with a VG248 I'd very much recommend shutting down any ports not in use.  Alternatively you can configure them in CCM but not give them a DN.

    -Ryan 





----------------------------------------------------------------------------
    From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
    Sent: Thursday, February 14, 2008 3:05 PM
    To: Cisco Voyp List
    Subject: [cisco-voip] vg224 dialpeers


    In order to get a vg224 port to register I had to put:

    dial-peer voice 223 pots
     service stcapp
     port 2/23

    Is there any caveat with putting this on all ports whether they are configured in CCM or not? If I do, do they result in transient connections?

    Lelio
    --------------------------------------------------------------------------------
    Lelio Fulgenzi, B.A.
    Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
    (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
    "Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo."      WJR
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080214/7ba88606/attachment-0001.html