[cisco-voip] MOH not working between clusters
Dana Tong (AU)
Dana.Tong at didata.com.au
Thu Feb 14 21:05:11 EST 2008
Hi everyone,
I have a problem with Music on Hold between two CM clusters. One cluster is running CM4 and the other UCM5.1.3.1000-12.
Music on Hold out to the PSTN works fine but not between the two clusters. Phones in the UCM5 cluster hear MOH ok also.
Testing shows that the remote addresses change to the multicast MOH address but only silence is heard.
Does anyone have any tips to look for with MOH over an intercluster trunk?
Cheers
D
******************************************************************************
- NOTICE FROM DIMENSION DATA AUSTRALIA
This message is confidential, and may contain proprietary or legally privileged information. If you have received this email in error, please notify the sender and delete it immediately.
Internet communications are not secure. You should scan this message and any attachments for viruses. Under no circumstances do we accept liability for any loss or damage which may result from your receipt of this message or any attachments.
******************************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080215/7f07a43f/attachment.html
More information about the cisco-voip
mailing list