[cisco-voip] Night Bell

[Craig Staffin]

Typically I see these interfaces being Trunk type so you would need an FXO
port.

I don't remember ever seeing one that was station to tell you the truth.

Craig

On Fri, Feb 15, 2008 at 3:07 PM, Jonathan Charles <jonvoip at gmail.com> wrote:

> No, just a bell on a wall as far as I can tell... it has been painted
> over a few hundred times...
>
>
> Jonathan
>
> On Fri, Feb 15, 2008 at 2:58 PM, Craig Staffin <craig at staffin.org> wrote:
> > is it a night bell through a pageing system?
> >
> >
> >
> > On Fri, Feb 15, 2008 at 2:50 PM, Jonathan Charles <jonvoip at gmail.com>
> wrote:
> > >
> > >
> > >
> > > I am installing a new site and I have encountered my first Night Bell,
> > > it is an old western electric thing that was plugged into their old
> > > PBX
> > >
> > > As soon as I configure a DN on it in MGCP, it goes off hook and starts
> > > ringing and the port is S_CONNECT...
> > >
> > > Same if I configure it H323
> > >
> > > It is connected to a VIC2-4FXS/DID set to POTS in MGCP
> > >
> > >
> > > Any ideas?
> > >
> > >
> > >
> > >
> > >
> > > Jonathan
> > > _______________________________________________
> > > cisco-voip mailing list
> > > cisco-voip at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > >
> >
> >
> >
> > --
> > Craig Staffin
> > Craig at staffin.org
> > (H) 262-437-7313
> > (C) 262-613-6003
>



-- 
Craig Staffin
Craig at staffin.org
(H) 262-437-7313
(C) 262-613-6003
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080215/c0738ccd/attachment.html